Here is a partial list of sample holders that can be used according to the size and nature of your sample.

Rotating sample holder for reflection or transmission mode

This sample holder is equipped of a Phi rotation that reduces preferential orientation effects. Circular aluminum or single crystal sample mounts can be provided for reflection mode. In transmission mode, the powder is set on a support between two kapton films for example.

Sample holder with height adjustment for reflection mode

This sample holder is equipped with Phi rotation to reduce preferential orientation effects. The height is adjusted with a micrometric screw. Recessed circular aluminum or single crystal insert sample mounts can be provided for reflection mode.

sample holder for transmission mode

This sample holder is comprised of a goniometer head (2 rotations and X,Y, Z translations) set on a motorized axis. The continuous Phi rotation reduces preferential orientation effects. An alignment table with a microscope and sample holder attachment has been designed for precise adjustment of the capillary.

Sample holder with controlled atmosphere

This sample holder is for performing measurements under controlled atmosphere at room temperature. The spinning system is comprised of magnets and reduces preferential orientation effects. The cell can be completely isolated or can have a gas flow.

Automatic sample changer with 6 or 30 positions

This stage is used in order to automatically measure up to 6 or 30 samples. It can be operated under software control or manually according to user preference.  It has been developed to take advantage of the exceptionally fast analytical times associated with an Inel curved detector.

Gandolfi chamber - Rotating precession mount “RPM”( gandolfi) for single crystallites

This very useful accessory has been designed for use with conventional powder X-ray diffractometers allowing the phase identification of single crystals using an X-ray  powder diffractometer. 

Thin film analysis attachment

The thin layer measurements need a motorized deck in θ and Z to set the sample in the right orientation. This motorization is dimensioned depending on measures conditions, at ambient or variable temperature (the environmental cell weight and size is to be considered). So it is necessary to determine the wished working temperature at the very first step of your project. Do not hesitate to contact us on this purpose.

And also

Sample holder for fibers in transmission mode
Automatic sample changer for capillary, transmission mode
Low angle accessories

Download sample holders documentation



T 001 603 778 9161
      This email address is being protected from spambots. You need JavaScript enabled to view it.
Inel Inc, PO Box 147,
Stratham, 03885 NH, USA
T 001 603 778 9161 - F 001 603 778 9171